Salt spray test is an accelerated corrosion test that produces a
corrosive attack to the coated samples in order to predict its
suitability in use as a protective finish. The appearance of
corrosion products (oxides) is evaluated after a period of time.
Test duration depends on the corrosion resistance of the coating;
the more corrosion resistant the coating is, the longer the period
in testing without showing signs of corrosion. Different coatings
have different behaviour in salt spray test and consequently, test
duration will differ from one type of coating to another.
According to the standard parameter of JIS, ASTM, CNS, GB.
salt spray test: NSS, ACSS
Air pressure barrels:47℃±1℃
Corrosion resistance test: CASS
Air pressure barrels: 63℃±1℃
Specifications (Note: We reserve the right to change specifications
without prior notice)
1600 X 500 X 1000
1200 X 500 X 800
900 X 500 X 600
600 X 400 X 450
2240 X 1500 X 1600
1410 X 1280 X 880
1460 X 1280 X 910
1130 X 1070 X 630
Salt Water Tank Volume (L)
Temp. range (Testing barrel)
Temp. range (Pressure barrel)
Pressed Air Pressure
1.0~2.0ml/80cm²/h(Collect at least 16 hours, take the average)
Ambient Relative Humidity
More than 85%R.H.
AC220V 1Φ 50Hz
(1) Spray tower
(2) Funnel cup
(3) Touch screen controller
(5) Pressure gauge
(6) Metering cylinder
(1)Chamber real-time temperature
(2)Chamber temperature setting
(3)Actual test time
(4)Test time setting
(7)Machine start/stop working button
(8)Spray start/pause button
(9)Test chamber low water alarm
(10)Defog after test
(11)Salt water tank low water alarm
(12)Reduce setting value
(13)Increase setting value
(14)Pressure barrel low water alarm
(15)Non-spray time setting
(16)Spray time setting
(17)Pressure barrel temperature setting
(18)Pressure barrel real-time temperature
|Box material||The inside and outside the box are made of high temperature and
high humidity corrosive high grade A gray PVC (thickness 5 ~ mm),
the use of advanced production technology with three-dimensional
ring, welded, solid structure, never deformation, gorgeous,
applicable to salt spray, copper acetate and other testing
|Reagent bottle||Conceal one-piece reagent bottle, easy cleanout and operation.|
|Air pressure barrel||It is made of SUS304 # stainless steel, refined tank structure
design, high temperature, high humidity, high pressure, high
corrosiveness resistant., and after several years of accumulated
experience, successfully solved the short time water shortage of
the general salt spray machine technical problems, unique internal
design of the pressure tank, so that water shortage in pressure
tank is no longer your worry and troubles. It is in a leading
position in the industry.|
|Test sample holder||A "gray" PVC material is refined into a "V" shaped strip. The full
set is made of molds. The strength is higher. It is matched with
tempered glass straight 10mm "O" strip to ensure that the product
15 ° -30 ° angle of the test sample rack using flat indexing, can
adjust the angle, four fog uniform, consistent by the fog, the test
results are accurate, the number of test samples placed more.|
|Chamber cover||Using a 5mm thick transparent PVC plate with high toughness, a 100
degree ridge transparent cover was designed by physical bending
method, so that dew droplets remaining on the cover slid along the
cover wall to the sealing groove not fall the test products.|
A. With self-detection and other advanced features, is a great
choice for your multiplier.
B. All-digital circuit design, accurate temperature control, use
high-quality imported electrical materials, reasonable wiring
design, long life, test function is complete.
C. With power outage memory function, so that the original time
after the call to complete the remaining time to complete the test
Inspection work, with double over-temperature protection, water
level warning, to ensure safe use.
D. Spray and stop fog time can be set separately for circulating
E. Fog seal tank using environmentally friendly water sealing, to
prevent mist leakage.
F. Spray tower with conical disperser, with a guided fog, adjust
the fog and even falling fog, etc.G. The instrument adopts ergonomic design, beautiful appearance,
|Air supply system||Air pressure is two-stage adjustment, the first is roughly
adjustment 2 Kg/cm2, import air filter with the function of water draining, the second
is accurate adjustment 1Kg/cm2,1/4 pressure gage, show precision and accuracy.|
|Mist spray pattern|
Knut principle absorb the salt water and then atomization, fogging
degree is on average, no block and crystal phenomenon absolutely,
make sure the test proceed continuously.
Spray quantity of 1~2ml/h can be adjustable (ml/80cm2/h test on the
standard requirement average quantity of 16 hours). The hopper
installs in cell, good looking and orderliness appearance, observe
convenience, reduce the instrument install space.
- The nozzle makes of tempered glass, can be adjust the size and the
angle of spray.
|Heating system||Adopt direct heating way, fast rate of temperature increase so
reduce the standby time, when reach the temperature, automatic
shift temperature constant state, accuracy temperature, low power
consumption. Pure titanium heating tube, resistance to acid and
alkali corrosion, overlength working life.|
|Safety Protection||Laboratory pressure saturation tank heating tank with liquid
expansion safety temperature controller 0 ~ 120 ℃ (Italy EGO).
Automatic, manual two water systems, automatic or manual pressure
bucket, laboratory water level, to prevent water damage to
ultra-high temperature instruments.|
Illustration on the back of the salt spray tester
We are on line 24 hours, your any questions will get timely
effective treatment and recovery.
Depending on the size of the order and its destination, we will
find the most efficient way of delivering your order. Collect
shipments through your account at UPS, FedEx, freight forwarder of
choice or other can also be arranged. Let us know of such
arrangements with your Purchase Order.
Quotes and Orders do not include customs duties and taxes as they
vary from country to country and are the sole responsibility of the
1. Q: Have your machine met relevant standards, and with relevant
A: Yes, our machines are manufactured according to International
Standards. If TEST CERTIFICAT required, it can be offered.
2. Q: How-to vedio provided?
A : Yes, if required, our engineers will record a specialize how-to
video for you.
3. Q: Is the machine made in your own plant?
A: Yes, welcome to visit our plant(factory), also we support OEM
4. Q:How you do the maintenance oversea?
A: In the way you are convenient, by Telephone or E-mail or Vedio
If you are interested in any item of our company, kindly please
contact Bella via call at 0086-13532825374 directly or send your inquiy to firstname.lastname@example.org for more information and fast response, welcome to visit us and
look forward to serving your needs