Stainless Steel Salt spray test chamber is widely adopted in surface treatment proceedings of various
material, including painting, electroplating, organic and inorganic
coating, anode processing, antirust oil and so on, with this
anti-corrosive treatment to test corrosion resistance of their
products, the quality control can be much more precise and reliable
to final confifently ensure the performance of the finished goods,
raw material and components.
1. It is made of PP&PVC, which endures acid and high
2. The patented nozzle and spray unit make an uniform spray rate.
3. The defogging equipment can automatically defog, which gives us
a clear view of the test samples.
|Specifications (Note: We reserve the right to change specifications
without prior notice)|
|Interior dimensions(W*H*D)mm||1600 X 500 X 1000||1200 X 500 X 800||900 X 500 X 600||600 X 400 X 450|
|Exterior dimensions(W*H*D)mm||2240 X 1500 X 1600||1410 X 1280 X 880||1460 X 1280 X 910||1130 X 1070 X 630|
|Salt Water Tank Volume (L)||60||40||25||15|
|Temp. range (Testing barrel)||35±1℃～50±1℃|
|Temp. range (Pressure barrel)||47±1℃～63±1℃|
|Test applicable||NSS, ACSS,CASS,CORK|
|Pressed Air Pressure||1.00±0.01kgf/cm²|
|Spray Amount||1.0~2.0ml/80cm²/h(Collect at least 16 hours, take the average)|
|Ambient Relative Humidity||More than 85%R.H.|
|PH Value||6.5~7.2 3.0~3.2|
|Spraying Manner||Programmable Spraying|
|Power||AC220V 1Φ 50Hz|
(1) Spray tower
(2) Funnel cup
(3) Touch screen controller
(5) Pressure gauge
(6) Metering cylinder
(1)Chamber real-time temperature
(2)Chamber temperature setting
(3)Actual test time
(4)Test time setting
(7)Machine start/stop working button
(8)Spray start/pause button
(9)Test chamber low water alarm
(10)Defog after test
(11)Salt water tank low water alarm
(12)Reduce setting value
(13)Increase setting value
(14)Pressure barrel low water alarm
(15)Non-spray time setting
(16)Spray time setting
(17)Pressure barrel temperature setting
(18)Pressure barrel real-time temperature
Test chamber temperature control: Control the chamber temperature ,
according to standard, NSS AASS test is 35℃,and CASS test is 50℃.
Pressure barrel temperature control:Control the saturated air
barrel temperature, NSS AASS is 47℃,CASS test is 63℃.
NSS AASS Test:Chamber temperature set 35℃, Pressure barrel
temperature set in 47℃(40℃-50℃).
CASS test :Chamber tember temperature set 50℃, Pressure barrel
temperature set 63℃(60℃-70℃).
Power switch:Control the whole machine power. Long press for power
on or off.
Start/stop switch:Control the heating system of test chamber, heat
sink and Pressure barrel.
Spray/pause switch:control the spray system.
Defog switch:control defog system, clear the salt mist in chamber
Test chamber low water alarm:When the water level is low, the light
will flicker . Add pure water into the test chamber until the light
Salt water tank low water alarm:When the salt water level is low,
the light will flicker.Add salt water into the salt water tank
until the light doesn,t flicker.
Pressure barrel low water alarm:When the water level is low, the
light will flicker.Add pure water into the pressure barrel nutil
the light doesn,t flicker.
Illustration on the back of the salt spray tester
We are on line 24 hours, your any questions will get timely
effective treatment and recovery.
Depending on the size of the order and its destination, we will
find the most efficient way of delivering your order. Collect
shipments through your account at UPS, FedEx, freight forwarder of
choice or other can also be arranged. Let us know of such
arrangements with your Purchase Order.
Quotes and Orders do not include customs duties and taxes as they
vary from country to country and are the sole responsibility of the
1. Q: Have your machine met relevant standards, and with relevant
A: Yes, our machines are manufactured according to International
Standards. If TEST CERTIFICAT required, it can be offered.
2. Q: How-to vedio provided?
A : Yes, if required, our engineers will record a specialize how-to
video for you.
3. Q: Is the machine made in your own plant?
A: Yes, welcome to visit our plant(factory), also we support OEM
4. Q:How you do the maintenance oversea?
A: In the way you are convenient, by Telephone or E-mail or Vedio
If you are interested in any item of our company, kindly please
contact Bella via call at 0086-13532825374 directly or send your inquiy to firstname.lastname@example.org for more information and fast response, welcome to visit us and
look forward to serving your needs